Wood Protection Products Fact Sheet

Sansin Foundation

A first coat penetrating clear UV protective treatment used for light wood tones. Available as SDF Foundation or Classic Foundation.

• Timbers
• Logs
• Dimensional
  Lumber

200-300 sq.ft.
(18.58-27.87 m²)
per U.S. gallon (3.78L)
Available in Fir, Cedar and Light Wood Tones.

1 coat Foundation + 2 coats of appropriate system (Classic, SDF, ENS).

Refer to topcoat formula maintenance.

Sansin Classic 1•2•3

Penetrating 3 coat system designed to protect. Low VOC.
Natural, low lustre finish.

Vertical surfaces:

• Logs, Timber, Sidings
• Railings
• Wood with high moisture content^*

Classic 1 – 150-250 sq.ft.
Classic 2 – 200-300 sq.ft.
Classic 3 – 250-350 sq.ft.

3 coat¹ Classic System for naturals wood tones and translucent colors.
2 coats¹ for saturated and ultra-saturated colors.

Coat every 3-6 yrs.
Apply maintenance coat of Classic Naturals Topcoat or properly toned Classic 3.

Sansin Dec

Rugged 2-coat formula designed for decks. Will not crack, peel or blister.
Low lustre, low VOC finish.

Horizontal surfaces:

• Decks
• Wood with high moisture content^*

200-300 sq.ft.
(18.58-27.87 m²)
per U.S. gallon (3.78L)

2 coats4 Dec
in preferred color.
Consider DEC Topcoat for additional sheen and finish.

Coat every 1-4 yrs.
Apply maintenance coat of appropriate DEC color formula or tinted topcoat.

Sansin SDF

Complete wood protection in just 1 coat. Outstanding weather and UV protection.
Highly water repellent.
Low VOC.

• Siding
• Fences
• Log & Timber
• Decks
• Outdoor Furniture
• Hardwoods, modified woods

200-300 sq.ft.
(18.58-27.87 m²)
per U.S. gallon (3.78L)

1 coat SDF with appropriate mil thickness increased pigment load – apply 2nd coat¹ for added protection
on vertical surfaces.

Consider SDF Topcoat for a fuller finish.

Horizontal surfaces: 1-4 yrs. Vertical surfaces: 3-6 yrs. Apply maintenance coat of appropriate SDF color formula or tinted topcoat.

Sansin ENS

Film-forming finish for long-lasting exterior protection. Low VOC. Optimum Clear, Low Lustre, Extra Low Lustre, Satin and Gloss.

• Furniture
• Windows
• Doors, Millwork
• Dry Wood & Siding
• Logs

300 sq.ft.
(27.87 m²)
per U.S. gallon (3.78L)

2 coats³. For bare
wood, always use an adequately pigmented, penetrating 1st coat. Such as Dec, Classic or SDF.

Consider ENS Optimum Clear as a final finish available in multiple sheen levels.

Coat every 4-5 yrs.

Sansin WoodForce

Protective wood treatment aggressively repels water. Provides weathered appearance while protecting against wood rot and discoloration. Easily mixed for custom barnboard colors and creative vintage effects.

• Wood Siding
• Logs
• Fences
• Wood Shingles
• Yard Furniture

100-200 sq.ft.
(9.29-18.58 m²)
per U.S. gallon (3.78L)

2-3¹ coat system.
Comes in clear, grays
and vintage colors.

Vertical: 3-6 years.

Sansin Resolution

A two-part, environmentally-friendly non-grain raising high performance wood finish system. Tougher, more beautiful and longer-lasting than varnish.

• Marine
• Furniture
• Doors
• Windows
• Millwork

Resolution I – 150-200 sq.ft.
Resolution II – 75-100 sq.ft.
per Litre
Gloss or Satin.

1 coats⁵ Resolution I
3-7 Coats³ Resolution II
Final Coat³ Resolution II

Marine:
12-24 months
Exterior millwork:
24-48 months

Purity Interior Stain

Penetrating spray or brush stain. Easy to apply – no streaking. Excellent clarity. 0-VOC. Topcoat in 15-30 minutes.

• Interior Walls
• Ceilings
• Cupboards
• Trim & Railings

300-500 sq.ft.
(27.87-46.45 m²)
per U.S. gallon (3.78L)

1 coat.
Select Purity Clear,
Glacier or Floor as a protective topcoat.

See Purity Clear,
Glacier or Floor.

Purity Interior Gel Stain

Penetrating – long open time.
Wiping stain. 0-VOC. Can be topcoated quickly.

• Doors
• Cabinets
• Furniture

300-500 sq.ft.
(27.87-46.45 m²)
per U.S. gallon (3.78L)

1 coat.
Select Purity Clear,
Glacier or Floor as a protective topcoat.

See Purity Clear,
Glacier or Floor.

Purity Interior Glacier

A crystal-clear, non-ambering, tough lacquer finish to enhance and protect interior wood.
Low VOC.

• Interior Walls
• Ceilings
• Cupboards
• Trim & Railings
• Floors, Furniture

400-500 sq.ft.
(37.16-46.45 m²)
per U.S. gallon (3.78L)

2 coats³.
Available in Low Lustre, Extra Low Lustre, Satin or Gloss.
Clear, Deep & White Bases.

Apply as needed.
Subject to traffic
and damage.

Purity Interior Clear

A clear finish to enhance the warm tones found in wood species like pine and cedar.
Low VOC.

• Interior Walls
• Ceilings
• Trim and Railings

300-500 sq.ft.
(27.87-46.45 m²)
per U.S. gallon (3.78L)

2 coats³.
Available in Low Lustre, Extra Low Lustre, Satin or Gloss – use Gloss as 1^st coat.

Apply as needed.
Subject to traffic
and damage.

Purity Nature’s Oil

Penetrating, full-drying oil.
For interior wood surfaces.
Rich low lustre finish protects and defines wood character without raising grain.

• Floors
• Timber
• Ceilings

450-600 sq.ft.
(41.81-55.74 m²)
per U.S. gallon (3.78L)

1-2 coats .

Apply as needed.
Subject to traffic
and damage.

Purity Interior Floor

Gymnasium grade floor finish. Highly resistant to wear, scratches, stains and scuffs. Low VOC, good chemical resistance. Low Lustre, Extra Low Lustre, Gloss and Satin.

• Floors
• Cabinets
• Counters
• Interior working
  wood surfaces

400-500 sq.ft.
(37.16-46.45 m²)
per U.S. gallon (3.78L)

2-3 Coats³.
Recommended for optimum floor protection.

Apply as needed.
Subject to traffic
and damage.